Kluslijst Lasers 2019-2020: verschil tussen versies

Uit EurosWiki
Naar navigatie springen Naar zoeken springen
Nsulzer (overleg | bijdragen)
kGeen bewerkingssamenvatting
Nsulzer (overleg | bijdragen)
Geen bewerkingssamenvatting
Regel 15: Regel 15:
==Laser Standard==
==Laser Standard==
Maintenance Jobs are split by hull.
Maintenance Jobs are split by hull.
On one hull there is a missing camcleat fairlead, buy a new one and fix.


===Barely Legal===
===Barely Legal===
Regel 34: Regel 36:
|-
|-
| 2
| 2
| Fix Tip
| Fix Tip: Fill the hole with filler and paint with DD
| -
| -
| Michiel, Freddy, Niels
| Michiel, Freddy, Niels
| Ongoing
| Ongoing
| Done filling and sanding, paint?
|  
|-
|-
| 3
| 3
Regel 48: Regel 50:
|-
|-
| 4
| 4
| Fix Self Bailer
| Attach/Replace Self Bailer
| Self Bailer
|  
|  
|  
|  
|  
Regel 83: Regel 85:
|-
|-
| 9
| 9
| Fix Cockpit hole  
| Fix Cockpit hole: Cover with fibergalss and epoxy, paint with DD
| -
| -
| Niels
|  
| Begun
| Begun
| Let dry, then epoxy and mats
|  
|}
|}


Regel 108: Regel 110:
|-
|-
| 2
| 2
| Fix Self Bailer
| Attach/Replace Self Bailer
| Self Bailer
|  
|  
|  
| Done  
| Done  
Regel 147: Regel 149:
|-
|-
| 1
| 1
| Fix Tip
| Fix Tip: Fill the hole with filler and paint with DD
| -
| -
| Michiel, Niels, Freddy
| Michiel, Niels, Freddy
Regel 154: Regel 156:
|-
|-
| 2
| 2
| Attach Self Bailer
| Attach/Replace Self Bailer
| Self Bailer
|  
|  
|  
|  
|  
Regel 200: Regel 202:
|-
|-
| 2
| 2
| Fix Self Bailer
| Attach/Replace Self Bailer
| Self Bailer
|  
|  
|  
|  
|  
Regel 207: Regel 209:
|-
|-
| 3
| 3
| Reattach Hiking Strap Eyestraps
| Reattach Hiking Strap Eyestraps at back of cockpit
| -
| -
|  
|  
Regel 269: Regel 271:
| 3
| 3
| Boom 3: Replace Clew Strap
| Boom 3: Replace Clew Strap
| Clew Strap
|  
|  
|  
| Done
| Done
Regel 276: Regel 278:
| 4
| 4
| Sail 4: New Battens
| Sail 4: New Battens
| Batten Set
|  
|  
|  
| Done
| Done
Regel 290: Regel 292:
| 6
| 6
| Boom 4: New Mainsheet
| Boom 4: New Mainsheet
| Mainsheet Line
|  
|  
|  
| Done
| Done
|  
|  
|-
| 7
| Put last rudder back together
|
|
|
| Not all attachments fit every rudder. If it doesn't fit, take apart other ones and find the combination that fits.
|}
|}



Versie van 22 mei 2020 15:31

Op deze pagina staat de kluslijst voor Laser Standard, Laser 2 en volgboot voor het klusseizoen 2019-2020.

Overview

An overview of the staus of each boat is presented in the following excel sheet: Bestand:Laser Maintenance19-20.xlsx This sheet also contains a table of spare parts to be bought.

Below is a list of some of the maintenance to be done.

Laser Standard

Maintenance Jobs are split by hull.

On one hull there is a missing camcleat fairlead, buy a new one and fix.

Barely Legal

18. Wit

# Job Spare Parts to buy Name Status Comments
1 Clean Thoroughly - Use "Ontweeringswater"
2 Fix Tip: Fill the hole with filler and paint with DD - Michiel, Freddy, Niels Ongoing
3 Reattach Drain Plug - Niels Done
4 Attach/Replace Self Bailer
5 Attach New Hiking Strap and Bungee -
6 Place Teflon Mast Step -
7 Check deck cleats and plates; tighten -
8 Sand down deck repairs - Niels Done
9 Fix Cockpit hole: Cover with fibergalss and epoxy, paint with DD - Begun

After Eighteen

19. Groen

# Job Spare Parts to buy Name Status Comments
1 Clean Thoroughly - Bottom still to do Use "Ontweeringswater"
2 Attach/Replace Self Bailer Done
3 Check Hiking Strap Bungee - Done
4 Place Teflon Mast Step - Done
5 Check deck cleats and plates; tighten - Done

Kusje Kusje

20. Rood

# Job Spare Parts to buy Name Status Comments
1 Fix Tip: Fill the hole with filler and paint with DD - Michiel, Niels, Freddy Fill tip with filler
2 Attach/Replace Self Bailer
3 Attach New Hiking Strap and Bungee -
4 Place Teflon Mast Step -
5 Check deck cleats and plates; tighten -

New Laser

21. Groen, glad dek.

# Job Spare Parts to buy Name Status Comments
1 Clean Thoroughly - Use "Ontweeringswater"
2 Attach/Replace Self Bailer
3 Reattach Hiking Strap Eyestraps at back of cockpit -
4 Place Teflon Mast Step -
5 Attach Cunningham Carabiner -
6 Check deck cleats and plates; tighten -
7 Think of a fun name! -

Spars, Foils, Other

For maintenance tracking purposes all foils and spars have a number associated with them (e.g. "Mast 1"). This number is written on masking tape somewhere on said part. If you have to remove this sticker, reattach it as soon as possible!

# Job Spare Parts to buy Name Status Comments
1 Wash Wetsuits - Laura Done
2 Mast 1: Replace Top section bottom bracket Said Bracket
3 Boom 3: Replace Clew Strap Done
4 Sail 4: New Battens Done
5 Centerboard 1 and 3: Fill in holes - Freddy Done Coated with Pantsercoat
6 Boom 4: New Mainsheet Done
7 Put last rudder back together Not all attachments fit every rudder. If it doesn't fit, take apart other ones and find the combination that fits.

Coach Boat

# Job Spare Parts to buy Name Status Comments
1 Clean Thoroughly - Niels Done
2 Plug Front Hole - Menno Done Possibly find a plug that fits
3 Fix deck holes - Use plastic strips and heat gun
4 Install Rear Drain Plug - Done Kasper

Laser II

Look though inventory and assess what needs to be done to get one or two sailing again.

Zie ook